|
|
 |
|
|
USB3.0 CMOS Camere Series
1/1.8 inch 1.3 Mega-Pixels USB3.0 Color / Mono
STC-MCE132U3V / STC-MBE132U3V
OMRON SENTECH
|
|
|
|
The STC-MCE132U3V/STC-MBE132U3V(USB 3.0 color/monochrome camera) features 1/1.8″ e2v CMOS sensor,
1.3MP resolution, 55 fps, and an ultra compact 28 (W) × 28 (H) × 33.8 (D) mm size.
Utilizing the powerful USB3 Vision standard, this camera is machine vision ready!
|
|
| Specifications |
| Model Number |
STC-MCE132U3V(Color) |
STC-MBE132U3V(Monochrome) |
| Image Sensor |
1/1.8″ 1.3M CMOS(e2V:EV76C560ACT-EQV)
Spectral Sensitivity Characteristics |
1/1.8″ 1.3M CMOS(e2V: EV76C560ABT-EQV)
Spectral Sensitivity Characteristics |
| Active Picture Elements |
1280 (H) × 1024 (V) |
| Cell Size |
5.3 (H) × 5.3 (V) µm |
| Scanning Methods |
Full Scanning / AOI (Horizontal/Vertical) |
| Shutter Type |
Global Shutter / Rolling Shutter (Selectable) |
Maximum Frame Rate
(in Full Scanning Mode) |
1.3M: 1280 × 1024 : 60fps (Raw 8/10bits), 55fps (RGB8 only on color model)
*Frame rate will drop if connected with the USB2.0 port |
Maximum Frame Rate
(in Full Scanning Mode
and ROI) |
XGA (1024 × 768) : 80fps (Raw 8/10 bits) , 71fps (RGB8 only on color model)
VGA (640 × 480) : 127fps (Raw 8/10 bits) , 106fps (RGB8 only on color model)
Minimum ROI (32 × 32): 1,222fps (Raw8/10 bits,Rolling Shutter)
Minimum ROI (32 × 32): 1,270fps (Raw8/10 bist,Global Shutter)
Minimum ROI (32 × 32): 416fps (RGB8,Rolling Shutter)
Minimum ROI (32 × 32): 424fps (RGB8,Global Shutter) |
| Sync. System |
Internal |
| Video Output Format |
RGB8, RAW 8bit/10bit, |
RAW 8bit/10bit |
| S/N Ratio(8bits) |
Less than 3 digit(Gain 0 dB) |
| Minimum Scene Illumination |
28.14lx at F1.2 |
0.26lx at F1.2 |
| ALC |
Auto Shutter /Auto Gain (Default:OFF) |
| Electronic Shutter |
Free-run Mode: Exposure Time 16 µseconds to 0.97 seconds (in full scanning mode)
Preset Trigger Mode: Exposure Time 16 µseconds to 0.97 seconds (in full scanning mode) |
| Gain |
Analog |
0 to 1.97dB (Default: 0 dB) |
| Digital |
x0.00 to x7.98 (Defaul: x0.00) |
| Offset |
Digital |
0 to 255 digits on 12bits (Default:168) |
| ROI |
ROI (Horizontal:32 to 1,280 pixels / Vertical: 32 to 1,024 Line) (Default: 1,280×1,024)
Adjustable Steps: 4 pixels in horizontal direction and 4 lines in vertical direction |
| Binning Function |
Horizontal 1/2, Vertical 1/2, (Default:1/1)
*Pixels in the horizontal and vertical direction can be added to increase the brightness.
Available on �gHorizontal and Vertical�h |
| Skipping Function |
Horizontal 1/2, 1/4, Vertical 1/2, 1/4 (Default:1/1)
|
| Mirror Image |
Off / Horizontal / Vertical / Horizontal and Vertical (Default: Off) |
| Pixel Defect Correction |
Up to 32 pixels (Default:ON) |
| White Balance |
Auto / Manual / One-shot(Default:Manual) |
N/A |
| Operational Mode |
Free-run / Edge-preset Trigger |
| Frame Memory |
One Frame |
| Interface |
USB 3.0 Super Speed (USB 3.0 Micro B) |
| Input / Output |
Two Inputs and Two Outputs |
| Power |
Input Voltage |
+5V(typ.)(Conform to USB Standard) |
| Consumption |
Less than 2.0 W |
| Dimensions |
28(W) × 28(H) × 33.8(D)mm *excluding the connectors→Drawing |
| Optical Filter |
IR Cut Filter |
No IR Cut Filter |
| Lens Mount |
CS Mount |
| Optical Center Accuracy |
Positional accuracy in Horizontal and Vertical directions:+/-0.5mm
Rotational accuracy of Horizontal and Vertical: +/-0.35 deg. |
| Interface Connectors |
USB Connector: USB3.0 MicroB type
I/O Connector:HR10A-7R-6PB (Hirose)or equivalent |
| Camera Mounting |
M2 screw holes (Three on top, bottom and both side plate)
M4 screws holes (Two on top and both side, four on bottom plate) |
| Weight |
Approximately 38g |
| Operational Temperature |
0 to +40 deg. C |
| Storage Temperature |
-30 to +65 deg. C |
| Vibration |
20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G, XYZ 3 directions 30 min. each |
| Shock |
Acceleration 38 G, half amplitude 6 ms, 3 directions 3 times each |
| Standard Compliancy |
EMS: EN61000-6-2, EMI: EN55011 |
| RoHS |
RoHS Compliant |
|
| Camera settings |
Simple Setting |
▪Gain(Auto,Manual)
▪Shutter(Auto,Manual)
▪White Balance(Auto,Manual)
▪Mirror Image(Off,Horizontal,Vertical,Horizontal and Vertical)
▪Hue/Saturation(OFF,value)
▪Gamma(OFF,value)
▪Sharpness(OFF,value)
|
| Advanced Setting |
▪Gain/Shutter(ALC Mode,Fixed Gain,Fixed Shutter,Digital Gain)▪White Balance(AWB,Manual)
▪Gamma(Gamma Mode,Sharpness,Digital Clamp)▪Color(Hue▪Saturation▪color correction matrix)
▪Color gamma(R Gamma,Gr Gamma,Gb Gamma,B Gamma)▪Defect pixel correction▪Trigger▪EEPROM
▪Other(Scan mode,V Blanking for FPS,Still Image Pixel Format,Color interpolation,Mirror image,Rotation▪Display Mode)
|
USB Camera Software
StCamSWare |
▪Freeze▪Live Video▪Rename Camera▪Setting▪Size▪Call Back(Grid,Ellipse,Ellipse,FPS,Logo,Frames Received)
▪Snap Shot▪Video Capture
▪Draw(Line,Rectangle,Oval,Character string,Measures angles,Polygons,Perpendicular lines,Arch,Bezier curve,Cross)
|
Software Development Kit
Standard SDK / Trigger SDK
StCam_SDK |
▪Function library , Sample programs(Programming Examples)
▪Development platform : Visual C++6.0 , Visual Basic 6.0 , Visual C#++.NET 2003 , Visual C++.NET 2003,Visual Basic.NET2003
|
|
 |
| Pin No. |
Signal Name |
IN / OUT |
Low |
High |
| 1 | GND
(IO_GND) | - | 0V |
| 2 | Output 2
(IO3) | OUT | Smaller than
0.8V | +3.3 to +24V |
| 3 | Output 1
(IO2) | OUT | Smaller than
0.8V | +3.3 to +24V |
| 4 | Input 2
(IO1) | IN | Smaller than
0.7V | +2.5 to +5V |
| 5 | Input 1
(IO0) | IN | Smaller than
0.7V | +2.5 to +5V |
| 6 | Power Input
(IO_VCC) | - | +3.3 to +24Vdc |
|
(A)USB Connector:USB3.0 micro-B Type
(B)I/O Connector:HR10A-7R-6PB
(Hirose) or equivalent
Use mating connector HR10A-7P6S (Hirose) or equivalent
|
|
|
|
|
■Cable with lock screw for USB 3.0 and cable with robot cable specifications are available.
|
 |
| Model No. |
Connector Configuration |
Length |
| NU3MBASU3S-2m |
USB 3.0 MicroB, with camera-side fastening screws |
2m |
| NU3MBASU3S-3.5m |
USB 3.0 MicroB, with camera-side fastening screws |
3.5m |
| NU3MBASU3B-3.5m |
USB 3.0 MicroB, with camera-side fastening screws, robot cables |
3.5m |
|
|
|
|
|
|
|
